|
Z-LASER's new ZMX Laser Projector "The Mobile" |
|
|
|
|
Positioning -
Processing
|
Mining / Blast hole positioning: With two ZMX you can project any pre-programmed point of intersection onto all surfaces.
 Z-LASER ZMX Laser Projector
The cross laser ZMX consists of a special housing within which the
diode laser can be rotated precisely by a motor. Utilising two ZMX
lasers, operators can quickly point to points for drilling blast holes.
One of the main fields of application is underground mining to show
precise points for drilling blast holes on the rock face. By slowly
changing the inclination of two ZMX lasers used in conjuntion, you can
pin-point required blast holes for blasting with dynamite. With larger
stone blocks these blast holes may be placed in up to three meters
deep.
The laser beam has been widened to two beams via a special double
optical prism. The two beams now form an asymmetrical cross with
different line lengths. This makes the rotation extremely visible - The
laser cross can be turned around a maximum of 350° in steps of 0.5°.
The laser and the rotating direction are controlled via an RS 485
interface.
As an accessory offers Z-LASER the mounting H1-55. This mounting guarantees an easy and exact adjustment of the laser.
 ZMX Laser for Blast Hold Positioning
For further information, please contact Cutting Edge Lasers on 1300 65 1718.
|
Positioning 
