|
Bosch Wallscanner - The universal detection device |
|
|
|
The Bosch Wallscanner D-tect 100 precisely shows where you can drill
safely, so you avoid damage to water pipes and power cables. It not
only tells you where to drill but also how deep you can drill with
safety.
The universal detecting device identifies a wide range of materials in
your wall. These not only include cabling, iron reinforcement, water
pipes and other metals, but also plastics and cavities. What makes it
unique is its ability to detect these items precisely up to a depth of
100 millimeters. The Wallscanner does not need to be calibrated before
use, making the D-tect 100 a cost-cutting tool for professionals and
advanced DIY enthusiasts.
Measurements are taken by running the Wallscanner along the top of the
work surface. The device generates a high-frequency magnetic field
which can penetrate brick walls, concrete and dry building walls.
Materials and cavities, whose physical and electrical characteristics
differ from the wall material, distort this field. The changed field
and additional en-route information provided by the sensors on the
wheels of the D-tect 100 are analyzed by the high-performance signal
processor for display. The system immediately calculates a clear,
conclusive depth profile with the obstacles identified through the many
electronic signals which it receives and displays in an easily
recognisable form. Once objects have been found, they can be located
precisely by moving the tool back over the work surface.
The graphic display shows a cross-section of the wall and marks any
potential obstacles with clear bars. They show how deep you can drill
without causing any damage. The back-lighting for the dislay helps when
working in poorly lit rooms and can be switched on at the push of a
button.
For further information, please contact Cutting Edge Lasers on 1300 65 1718.
|
Construction 
