WOW0821240209BLCLJLLLML

My Cart
Checkout Secure

Industry - Paper, Timber, Woodworking - Time & Cost Saving Precision Laser Manufacturing Solutions & Systems

Industry - Paper, Timber, Woodworking - Time & Cost Saving Precision Laser Manufacturing Solutions & Systems

LASERS FOR THE PAPER, TIMBER, WOODWORK INDUSTRY

In the printing and paper sector, lasers are highly suitable to the positioning of large quantities of material, such as paper rolls, which must be accurately aligned in order to ensure smooth processing in work steps down the line. Speak to our knowledgeable sales team about your application, we have the right lasers for the paper industry.

Paper Rolls 

Industry - Paper, Timber, Woodworking - Time & Cost Saving Precision Laser Manufacturing Solutions & Systems Geo 1

Large printing plants glue individual paper rolls together in a very precise manner when switching rolls. The end of the outgoing roll and those of the new roll must be accurately fitted in a short timeframe. Laser projections are very well-suited to display these gluing patterns.

Special Uses:

  • Precise, clean alignment of the projection
  • High IP protection class against dust
  • Reliability and durability

Advantages:

  • Measuring by hand is unneeded
  • Time-savings
  • Less material used

Recommended Products

Z Laser Z3D-Control

Z Laser LP-HFD2

Aligning Paper Stacks for the Punching Machine

Industry - Paper, Timber, Woodworking - Time & Cost Saving Precision Laser Manufacturing Solutions & Systems

Paper stacks can be aligned with extreme precision under the blade of the punching machine. The laser indicates the line where the paper is to be cut.

Special Uses:

  • Precise display of the cutting line at a variety of stacking heights
  • High IP protection class against dust

Advantages:

  • Manual measurement is unnecessary
  • Highly accurate cuts
  • Time-savings
  • Material-savings

Recommended Product

Z Laser Z3D-Control

Z Laser LP-HFD2

LASERS FOR THE WOOD INDUSTRY

In the wood industry, laser light is ideal for applications where, for example, working materials must be aligned with saw lines, milling threads or drilling points. Laser projections also provide quicker and more accurate results, even with glue binders and nail binders.

In these applications, laser projectors display complex design files as laser images in their original scale. These can be workpiece contours, or the positioning of vacuum suction cups onto fully automatic machines. For large working surfaces, several laser projectors are used at once. Speak to our knowledgeable sales team about your application, we have the right lasers for the wood industry.

Gluing Table - CNC-BAZ - Cutting Saws

Industry - Paper, Timber, Woodworking - Time & Cost Saving Precision Laser Manufacturing Solutions & Systems

Laser Systems for Woodworking Industries  

Industry - Paper, Timber, Woodworking - Time & Cost Saving Precision Laser Manufacturing Solutions & Systems 1

Industry - Paper, Timber, Woodworking - Time & Cost Saving Precision Laser Manufacturing Solutions & Systems 2

Industry - Paper, Timber, Woodworking - Time & Cost Saving Precision Laser Manufacturing Solutions & Systems 3

Machining Centers
You’ve made a big investment in CNC manufacturing – why not get the most out of it?  An SL-Laser ProDirector 6 laser projector takes the time and guesswork out of setups and changeovers, keeping your machine moving and reducing scrap. Quickly and accurately place pods and fixtures to the laser light, then place your material to the projected part profile – it couldn’t be easier!  Using a laser projector frees you from pinstops and allows you to nest small parts anywhere on the table to optimize your tool paths and run more parts in each nest.  Make entire stile and rail entry doors in one run.  Accurately “reintroduce” previously contour-cut parts for secondary edging operations. The laser accurately shows the tool path so you can place smaller blanks precisely. Using smaller blanks both saves material costs and reduces off-cut waste disposal costs. Projecting pod locations greatly reduces the chances of costly tool/pod collisions. Pod collisions are more than just the cost of the pod -  factor in the ordering cost, transit times, production delays or stoppages, the miscut workpiece and any damage to the bit or the spindle – it’s a very expensive mistake that doesn’t have to happen.
 
Furniture industry
The laser system is used in the furniture industry as visual support. The systems shows the contour of the fittings, for the right positioning and direction of that parts. A further use of the laser system is to show all the fittings and fixtures for the quality control.
 
Staircase manufacturing, interior fittings, kitchen development, boat measurement
Using the ProCollector is easy and intuitive. Quickly create accurate templates of 2D surfaces or 3D environments by simply pointing the laser target and clicking a button. The coordinate is captured automatically and stored. On a at surface only two measuring points per line are necessary. The software calculates the corners to complete intersecting lines. The ProCollector is wirelessly controlled. The finished design is stored as DXF or IGS and can be transfered immediately into your CAD program for further processing. The generated CAD drawing or any other DXF le can also be projected by the device onto a workpiece or building surface and used as a layout tool. Applications: building stairs, interior fittings, kitchen development, boat measurement...
#
We Stock, Service and Supply Laser Solutions and Products for all Industrial Trades - Laser Line, Cross and Special Optic Lasers for Positioning Applications, Industrial Laser Line Generator, Laser Line Generator Module, Laser Guide, Laser Measuring, Machinery Laser, Laser Aligning, Laser Position, Measurement Laser, 2d Projection Laser, Laser Optics, Laser Diode, Green Laser, Red Laser, Laser Cross, Laser Light, Industrial Laser Rangefinder, Alignment Laser, Z-Laser, SL Laser, Machine Laser, CNC Laser, Sawmill, Timber Mill, CNC Machine, Stone, Conrcete, Bricklaying, Cutting, Steel, Metal, Aluminium, Manufacturing, Textile, Leather, Automotive, Caravan, Tyre, Rubber, Plastics, Glass, Mining, Industrial, Engineering, Pre Fabrication, Boat Building, Ship Building, Pre Cast Concrete, Aerospace, Granite, Marble, Ceramics, Composition, Medical & Hospital, Food & Beverage, Logistics & Assembly, Tunnel, Paper, Timber, Woodwork, Tunnelling, Government, Military, Engineers.
$1,135.00

Z1Pil-635-pz

$1,192.80

Z10M18B-F-532-lg30

$253.00

Z5T Textile Pro

$710.00

Z5M18B-F-532-pz