WOW0821240209BLCLJLLLML

My Cart
Checkout Secure

Fluke 26200900 Pro3000 Tone Generator (Item no. 2327682)

The Pro3000 Tone and Probe Series provides clear and precise tracing of communication cabling. The innovative filtered probe obstructs signal interference present in the environment (caused by power cables and lighting) when listening for tone. The probe’s powerful speaker makes tracing cables through drywall, wood or other enclosures quick and easy.

The Pro3000 toner’s patented SmartTone technology (with five different tones for exact pair identification) allows the technician to identify individual pairs. The tone generator is also capable of sending tone up to 10 miles (16 kilometers) on most cables! The angled-bed-of-nails clips allow easy access to individual wires, and the RJ-11 connector is ideal for use on telephone jacks. Attach the nylon pouch to your belt, and you will be equipped for any wire identification job.

Specifications

Pro3000 Analog Toner Specifications

 User interface Slide switch selects Continuity or Tone Mode
Push button switch selects SOLID, ALT or OFF
Tone mode LED
Continuity/Polarity LED
Solid Frequency 1000 Hz nominal
Alternating Frequency 1000/1500 Hz nominal
Over Voltage Protection 60 Vdc in Toner/Polarity Mode
Output Power in Tone Mode 8 dbm into 600 ohms
Output Voltage Level in Continuity Mode 8 Vdc with fresh battery
Battery 9V alkaline
Temperature Operating: -20° C to 60° C, Storage: -40° C to 70° C
Case dimensions 2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm)

sdasd

Pro3000 Capability

Use the SmartTone capability of the Pro3000 Analog Tone Generator to identify the right pair. When touching the wires together and momentarily shorting the far end of a cable pair, the SmartTone technology will change the cadence of the tone generated. This tone change you hear through the probe positively verifies the correct wire pair. SmartTone provides five distinct tones for exact pair identification.

Tone Generator features:

  • SmartTone technology
  • Send tone signal up to 10 miles on most cables
  • Line cord features angled bed-of-nails clips and ruggedized RJ-11 plug for direct access to phone and data jacks without adapters
  • External switch allows selection of solid or alternating tone options, indi­cated with solid or flashing LEDs
  • Continuity testing
  • Line polarity confirmation

Pro3000 Design

The Pro3000’s ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood or plaster. A recessed on/off button helps prevent the probe from accidentally being turned on in the pouch. It accommodates a headset (sold separately) for use in noisy environments.

Probe features:

  • Loud large speaker amplifies tone through walls, enclosure, wood or plaster
  • Easy-to-use adjustable volume control dial
  • “Quick-twist” tip for easy replacement
  • Free spare tip inside Pro3000 Tone and Probe Kit

Pro3000F Filtered Probe

Signal Interference from sources in the environment can make tracing cable a frustrating process. The Pro3000F Filter probe “Stops the Buzz” by obstructing these signals allowing you to hear the tone you are tracing loud and clear. The Pro3000F is available in 2 versions:

  • The Pro3000F60 which filters out 60 Hz interference which is the standard frequency in North America
  • The Pro3000F50 which filters out 50 Hz interference which is common in Europe, Asia, and the Pacific.
Shipping
This Item Ships from Fremantle, Perth, Western Australia   

      

Please allow 2 - 10 days for your order to arrive. Although Most Stocked Products will generally Ship Overnight.  We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!

Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!

 

 

Here are 6 more great reasons to buy from us:

      

You get a full 30 days to return your item to us. If your product is faulty or damaged under manufacture warranty, simply send it back to us and we'll cheerfully replace it or fix the problem for you. 

Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!

In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.

We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.

Ordering from Laserman Technologies is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either.
Laserman the Best Laser Level, Pipe Laser and Laser Measuring Warranties in the Business - Now thats unbeatable value !!.

 

 

Fluke 26200900 Pro3000 Tone Generator (Item no. 2327682)

The Pro3000 Tone and Probe Series provides clear and precise tracing of communication cabling. The innovative filtered probe obstructs signal interference present in the environment (caused by power cables and lighting) when listening for tone. The probe’s powerful speaker makes tracing cables through drywall, wood or other enclosures quick and easy.

The Pro3000 toner’s patented SmartTone technology (with five different tones for exact pair identification) allows the technician to identify individual pairs. The tone generator is also capable of sending tone up to 10 miles (16 kilometers) on most cables! The angled-bed-of-nails clips allow easy access to individual wires, and the RJ-11 connector is ideal for use on telephone jacks. Attach the nylon pouch to your belt, and you will be equipped for any wire identification job.

Specifications

Pro3000 Analog Toner Specifications

 User interface Slide switch selects Continuity or Tone Mode
Push button switch selects SOLID, ALT or OFF
Tone mode LED
Continuity/Polarity LED
Solid Frequency 1000 Hz nominal
Alternating Frequency 1000/1500 Hz nominal
Over Voltage Protection 60 Vdc in Toner/Polarity Mode
Output Power in Tone Mode 8 dbm into 600 ohms
Output Voltage Level in Continuity Mode 8 Vdc with fresh battery
Battery 9V alkaline
Temperature Operating: -20° C to 60° C, Storage: -40° C to 70° C
Case dimensions 2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm)

sdasd

Pro3000 Capability

Use the SmartTone capability of the Pro3000 Analog Tone Generator to identify the right pair. When touching the wires together and momentarily shorting the far end of a cable pair, the SmartTone technology will change the cadence of the tone generated. This tone change you hear through the probe positively verifies the correct wire pair. SmartTone provides five distinct tones for exact pair identification.

Tone Generator features:

  • SmartTone technology
  • Send tone signal up to 10 miles on most cables
  • Line cord features angled bed-of-nails clips and ruggedized RJ-11 plug for direct access to phone and data jacks without adapters
  • External switch allows selection of solid or alternating tone options, indi­cated with solid or flashing LEDs
  • Continuity testing
  • Line polarity confirmation

Pro3000 Design

The Pro3000’s ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood or plaster. A recessed on/off button helps prevent the probe from accidentally being turned on in the pouch. It accommodates a headset (sold separately) for use in noisy environments.

Probe features:

  • Loud large speaker amplifies tone through walls, enclosure, wood or plaster
  • Easy-to-use adjustable volume control dial
  • “Quick-twist” tip for easy replacement
  • Free spare tip inside Pro3000 Tone and Probe Kit

Pro3000F Filtered Probe

Signal Interference from sources in the environment can make tracing cable a frustrating process. The Pro3000F Filter probe “Stops the Buzz” by obstructing these signals allowing you to hear the tone you are tracing loud and clear. The Pro3000F is available in 2 versions:

  • The Pro3000F60 which filters out 60 Hz interference which is the standard frequency in North America
  • The Pro3000F50 which filters out 50 Hz interference which is common in Europe, Asia, and the Pacific.
Shipping
This Item Ships from Fremantle, Perth, Western Australia   

      

Please allow 2 - 10 days for your order to arrive. Although Most Stocked Products will generally Ship Overnight.  We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!

Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!

 

 

Here are 6 more great reasons to buy from us:

      

You get a full 30 days to return your item to us. If your product is faulty or damaged under manufacture warranty, simply send it back to us and we'll cheerfully replace it or fix the problem for you. 

Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!

In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.

We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.

Ordering from Laserman Technologies is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either.
Laserman the Best Laser Level, Pipe Laser and Laser Measuring Warranties in the Business - Now thats unbeatable value !!.

 

 

Added to cart!