All SuperCAT4+ models come with a range of features designed to aid safe working practices.

High levels of electrical interference, as found around substations and near high-voltage transmission cables can overload sensitive electronics. Dynamic Overload Protection filters this interference out, enabling SuperCAT4+ to continue locating where other units struggle.

StrikeAlert warns the user to the possible presence of shallow cables and utility lines in both Power and Active Line modes.

Although work practices and guidelines insist power cables are buried below a certain depth, a common cause of cable strikes is unexpectedly shallow cables.

Indicates depth when the locator is oriented correctly above the target cable, pipe or sonde for the most accurate reading.

The audio signals emitted by the SuperCAT4+ are derived from the signals detected. Radio, Power and Active signals can be easily distinguished from each other, and from background noise, helping identification of target utilities, and aiding differentiation of closely co-located utilities.

APPLICATIONS

Locate pipelines protected by a Cathodic Protection System

Optimised for metal pipes including those that use rectified currents as part of their Cathodic Protection System. The CPS signal can be located and traced without the need to apply an additional transmitter signal to the pipeline

CPS

SuperCAT4+ CPS models are optimised to detect CPS signals to allow tracing of protected pipelines without disconnecting rectifiers.

Signal Clamping

Safely apply a T1 signal to a pipe or live cable up to 125mm/5” diameter without interrupting the supply.

Direct Connection

The most effective method for connecting to a valve, meter, junction box or other access points, as long as access is possible.

Induction

Conveniently apply a transmitter signal to a pipe or cable when a direct connection or signal clamping is not possible.